BHMA Certified Products

/Other/Corbin%20Russwin/Support/CR%20BHMA%20CERT.jpg

The Builders Hardware Manufacturing Association (BHMA) is comprised of industry-leading manufacturers of door hardware who develop and maintain performance standards, and advise on building codes and life safety regulations. Their work is essential to the maintaining security and enabling ease of movement through the public spaces we access every day. The BHMA is the only organization accredited by the American National Standards Institute (ANSI) to do this.

Participants in the BHMA Certification program voluntarily submit their products for testing by a nationally recognized independent laboratory to ensure that they meet a demanding set of performance standards. These standards evaluate the operation, durability, and security of a product, as well as the ability to maintain an attractive appearance in harsh environments. BHMA certified products are also subject to periodic testing audis to assure that the requirements of the certification are maintained.

Many Corbin Russwin products achieve Grade 1 or Grade 2 certification for strength, durability and security. View the latest product listings within the online BHMA Certified Products Directory featured on the BHMA website www.buildershardware.com

Look for the BHMA® Certification Mark Logo which means that the product is certified as conforming the othe criteria of its ANSI/BHMA standard.

See the charts in the dropdown menus below for more information!

Bored Locks

STANDARD SCOPE

OPERATION

DURABILITY

SAFETY & SECURITY

APPEARANCE

Forces required for latch retraction and closing of the door must ensure smooth egress (max torque of 28 in-lbf)

Subjected to 1 million cycles of opening and closing with 10 lb. axial load

Passes seven aggressive tests, including a 1,200 in-lbf locked lever torque and two directions of impact

Finish must be resistant to corrosion, chemicals, abrasion, and sunlight

Click here for the full scope

 

CORBIN RUSSWIN CERTIFIED PRODUCTS

Bored Locks

Grade 1

Grade 2

HP3000 Series x  

CL3100 Series

 x

 

CL3300 Series

x

 

CL3500 Series

x

 

CL3800 Series   x
CK4300 Series  x  
CK4400 Series   x
Mortise Locks

 

STANDARD SCOPE

OPERATION

DURABILITY

SAFETY & SECURITY

APPEARANCE

Forces required for latch retraction and closing of the door must ensure smooth egress (max torque of 28 in-lbf)

Subjected to 1 million cycles of opening and closing with 10 lb. axial load

Passes fifteen aggressive tests, including a 1,200 in-lbf locked lever torque and two directions of impact

Finish must be resistant to corrosion, chemicals, abrasion, and sunlight

Click here for the full scope

CORBIN RUSSWIN CERTIFIED PRODUCTS

Mortise Locks

Grade 1

Grade 2

ML2000 Series

x

 

Exit Devices

 

STANDARD SCOPE

OPERATION

DURABILITY

SAFETY & SECURITY

APPEARANCE

Opening and closing forces measured against that of typical human behavior

Subjected to 500,000 loaded cycles with no loss of operation

Outside levers and thumbpieces must withstand heavy forces and still prohibit entry

Finish must be resistant to corrosion, chemicals, abrasion, and sunlight

Click here for the full scope

CORBIN RUSSWIN CERTIFIED PRODUCTS

Exit Devices

Grade 1

Grade 2

ED3000 Series

x

 

ED4000 Series

x

 

ED5000 Series

x

 

ED7000 Series

x

x

ED8000 Series

x

 

Door Closers

STANDARD SCOPE

OPERATION

DURABILITY

APPEARANCE

PIVOTS

Must have range of checking control, two speeds of closing, adjustable closing speed, cylinder checking, and more

Subjected to 2 million cycles of opening and closing

Must demonstrate corrosion resistance by way of a salt spray test

Performance requirements involve cycles, maximum friction, vertical mismatch, and clearances

Click here for the full scope

CORBIN RUSSWIN CERTIFIED PRODUCTS

Door Closers

Grade 1

Grade 2

DC3000 Series

x

 

DC5000 Series

x

 

DC6000 Series

x

 

DC8000 Series

x

 

 

Door Closer

Standard

DC62900 Series

A156.15 

Multi-Point Locks

                                                               

 

STANDARD SCOPE

OPERATION

DURABILITY

SAFETY & SECURITY

APPEARANCE

Forces required for latch retraction and closing of the door must ensure smooth egress (max torque of 28 in-lbf)

Subjected to 800,000 cycles of opening and closing with 10 lb. axial load

Passes fifteen aggressive tests, 1,350 pound Grade 1 bolt strength test

Finish must be resistant to corrosion, chemicals, abrasion, and sunlight

Click here for the full scope

CORBIN RUSSWIN CERTIFIED PRODUCTS

Multi-Point Locks

Grade 1

Grade 2

FE5400S Series   x
BL6600 Series x  

FE6600 Series

x

 

MP6600 Series  x  
FE6700 Series x